Maretron USB100 NMEA 2000 USB Gateway UPC # 873804000039

Mini Tee. A Tee is used to tap into the trunk line for adding a drop connection. Gold contacts for greatest reliability, Keyed connectors for error-free connections , Male (left), Female (Bottom), Female (right). UPC # 873804002309

Micro Inline Termination Resistor. The inline terminator is used where the NMEA 2000 network is terminated at a product, for example the top of the mast at a weather instrument or GPS antenna/receiver. The inline terminator plugs directly into the...

Mini/Micro Tee. A Tee is used to tap into the trunk line for adding a drop connection. A Mini/Micro Tee has Mini connectors for the trunk lines and a Micro connector for the drop line,Gold contacts for greatest reliability, Keyed connectors for...

Maretron UPC # 873804001012

Maretron NM-CF Mini Male to Micro Female Reducer. The reducer is used to change from a Mini cable to Micro or Mid cable. For example, one end of the network might be terminated at the top of the mast but it may not be desireable to run a Mini trunk cable...

Mechanical, Contact Carrier Mat/Color: Thermoplastic PUR/Blue-Gray, Molded Body Mat/Color: Thermoplastic PUR/Blue-Gray, Contact Mat/Plating: Brass/Gold, Coupling Nut Mat/Plating: Brass/Nickel, Connector Outside Diameter: 0.59?Electrical, Current Rating:...

Micro Termination Resistors. Termination Resistors are required on a NMEA 2000 network and are placed at each end of a network trunk cable. Like the double-ended cordsets, the termination resistors are waterproof and continue to function even while...

Micro Tee. A Tee is used to tap into the trunk line for adding a drop connection. The standard tee is also available with a cap for a protected diagnostic connection. Tees can be mated with all other devices on the network of the same connector...

Maretron BHW100 Bilge High Water Detector UPC # 873804002521

Maretron Multiport Box Mic-Mid Male Homerun Mic-Mid Fem Drop UPC # 873804001616

Micro Bulkhead Feed-Thru. The Bulkhead Feed-Thru allows ease of installation through panels or bulkheads and establishes future connection points in a network installation. The bulkhead feed-thru also maintains the integrity of watertight bulkheads by...