ZENITEL ESC1 EXIGO SYSTEM CONTROLLER
Write a Review
Zenitel
ZENITEL ESC1 EXIGO SYSTEM CONTROLLER
- Brand
- Zenitel
- SKU:
- 1023000000
ZENITEL ESC1 EXIGO SYSTEM CONTROLLER
The system controller is based on IP technology, giving it extreme flexibility, superb audio quality and multiple possibilities for integration. The system controller handles routing and prioritization of up to 32 simultaneous audio channels in the system where audio can be distributed from up to 150 audio inputs to up to 250 zones.
The system controller features a display where status and faults can be viewed. This display also allows configuration of simple parameters. The system controller monitors and receives status information from every component in the system. Faults are time stamped, and presented in chronological order on the display. Buttons allow an operator to acknowledge and reset faults. The network connection to every component in the system is monitored, so a defect switch or broken cable will be detected just as reliably and fast as any other fault in the system.
The system controller also acts as the systems alarm generator and audio message storage. The embedded alarm generator features a set of the most common alarm tones, but can also be programmed to support custom alarm tones and patterns. Stored voice and audio messages is easily uploaded to the system controller as standard wav files.
The system controllers control inputs/outputs and audio inputs can be used locally by the system controller (e.g. for PTT and audio from a handheld microphone) or can be controlled by the system (e.g. audio input for background music).
IMPORTANT NOTE: This article comes without AMC-IP controller board. This board is mandatory for Exigo System Controller operation.
Key Features:
- Control and routing of audio channels
- 115 - 230 VAC primary power and 24 - 48 VDC secondary power
- Redundant Ethernet connections
- Digital audio processing
- Receives, handles and stores fault messages from the system
- Interface to PABX and iPBX
- Interface to telecom management, safety, automation and security systems
- Voice message storage
- Programmable alarm generator
- 6 configurable control outputs
- 6 configurable control input
MECHANICAL Specifications:
| Dimensions (HxWxD) | 87 x 482 x 390 mm |
| Weight | 9.5 kg |
| Shipping Weight | 10.5 kg |
| Mounting | 19 Rack, 2HU |
| Color | Black |
USER INTERFACE Specifications:
| Display | 3.5 QVGA Color TFT LCD |
| Button | Rotary selector button with push-to-select |
| Indicators | Primary power, Secondary power, Fault, Alarm, Disabled, In command |
ENVIRONMENTAL Specifications:
| Operating temperature | -15 °C to +55 °C |
| Operating humidity | 15% to 95% (non-condensing) |
| Storage temperature | -40°C to +70°C |
| Storage humidity | 10% to 95% (non-condensing) |
| Air pressure | 700 hPa to 1300 hPa |
| IP rating | IP-32 |
ELECTRICAL Specifications:
| Primary | |
| Connector | V-lock, IEC 60320-1 C14 compliant |
| Nominal input* | 110 230 Vac, 47-63 Hz |
| Secondary power | |
| Connector | Pluggable and lockable terminal |
| Nominal input | 24 - 48 Vdc |
| Power consumption | Pmax <100W |
| *) Power cord not included |
NETWORK Specifications:
| Ethernet | 2 x 10BASE-T, 100BASE-TX, Auto negotiation, Auto MDIX |
| Protocols | Protocols IPv4 (with DiffServ), TCP, UDP, HTTPS, TFTP, RTP, DHCP, SNMP, STENTOFON CCoIP® , NTP |
| LAN Protocols | VLAN(IEEE 802.1pq), Network Access Control (IEEE 802.1x), STP (IEEE 802.1d) |
| Management and operation | HTTP/HTTPS (Web configuration) DHCP and static IP Remote automatic software upgrade Centralized monitoring |
LINE OUTPUT Specifications:
| Levels | 0 dBv (1Vrms) |
| Gain | -40 dB +2dB |
| Levels | 600 Ohm |
| Frequency response | Hardware: 200 Hz - 19kHz |
| Audio codec | G722 |
LINE INPUT Specifications:
| Frequency response | Hardware: 80 Hz 20 kHz |
| Audio codec | G722 |
| Nominal input level | 100 mVRMS 1 VRMS |
| SNR | 80 dB |
| CMRR | 45 dB |
| Input impedance | 600 ? / 10 kOhm |
MICROPHONE INPUT Specifications:
| Frequency response | 80 Hz 20 kHz |
| Audio codec | G722 |
| Nominal input level | 1 mVRMS 100 mVRMS |
| SNR | 80 dB |
| CMRR | 45 dB |
| Input impedance | 600 ? / 10 k ? (selectable) |
| Phantom supply (optional) | 12 VDC ±10% @ 15 mA (IEC 61938, P12) |
CONTROL INPUTS AND CONTROL OUTPUTS Specifications:
| Control Inputs | 6 |
| Type | Closing contact, monitored |
| Control Outputs | 6 |
| Relay outputs: (COM, NO,NC) | Max recommended levels: 3A, 100Vdc, 125Vac, switching 60W/125VA |
| 24 V outputs | 24 VDC ±10%, 200 mA, monitored |
| Fault relay | 1 |
| Relay outputs: (COM, NO,NC) | Max recommended levels: 3A, 100Vdc, 125Vac, switching 60W/125VA |
CERTIFICATIONS Specifications:
| Immunity | EN 60945, EN 50130-4, EN 61000-6-2*, EN 55103-2 |
| Emissions | EN 60945, EN 61000-6-4* |
| Safety | EN 60065, IEC 60529 |
| *When used in conjunction with PN: 1023598000 & 1023598100 |
PRODUCT VARIANTS Specifications:
| 1023000100 | ESC1 Exigo System Controller package incl. AMC-IP board |
| Brand | Zenitel |
|---|
0 Reviews Hide Reviews Show Reviews
Zenitel
ZENITEL ENA2400-DC EXIGO NETWORK AMPLIFIER 2 X 400W POWER
Zenitel
ZENITEL ENA2200 EXIGO NETWORK AMPLIFIER 2 X 200 WATT POWER
Zenitel
ZENITEL ENA2100-AC EXIGO NETWORK AMPLIFIER 2 X 100W POWER
Zenitel
ZENITEL ENA2400-AC EXIGO NETWORK AMPLIFIER 2 X 400W POWER
Zenitel