Eaton NPOE-SPL-G-5VMU - ACTIVE POE SPLTR,5V M-USB
Write a Review
Write a Review
Eaton
Eaton NPOE-SPL-G-5VMU - ACTIVE POE SPLTR,5V M-USB
$27.00
- Brand
- Eaton
- SKU:
- NPOE-SPL-G-5VMU
- Condition:
- New
Split Your PoE Signal into Separate Power and Ethernet Connections for Edge Networks
Connect the NPOE-SPL-G-5VMU PoE (Power over Ethernet) splitter to your edge network up to 328 feet (100 meters) from a PoE switch or 48V injector. The splitter separates the power and data signals, delivering 5V 1A (5W) of power to the USB Micro-B plug and 10/100/1000 Mbps to the RJ45 data plug. This allows you more flexibility in placing devices in areas where an AC outlet is unavailable and too expensive or impractical to install.
Supports Power over Ethernet to Save You Money and Give You More Installation Choices
This PoE splitter supplies the power (through its USB connector) to operate non-PoE equipment, such as security cameras, VoIP telephones and wireless access points (WAP). This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install devices in areas far away from AC outlets, such as poles or ceilings. The NPOE-SPL-G-5VMU supports a wide range of input voltages from 36VDC to 57VDC and has a fixed USB output of 5VDC.
Simple Plug-and-Play Installation Has the Splitter Connected in Minutes
No configuration or software is required to add the NPOE-SPL-G-5VMU to your LAN. It complies with 802.3af (PoE), 802.3 (Ethernet), 802.3u (Fast Ethernet) and 802.3ab (Gigabit Ethernet) standards.
- NPOE-SPL-G-5VMU PoE to USB Micro-B and RJ45 Active Splitter
- Quick Start Guide
OVERVIEW
| UPC Code | 037332242143 |
| Product Type | Splitter |
| Technology | Cat5/5e; Cat6; PoE |
PHYSICAL
| Color | Black |
| Unit Weight (kg) | 0.05 |
ENVIRONMENTAL
| Operating Temperature Range | 32° to 104°F (0° to 40°C) |
| Storage Temperature Range | 5° to 122°F (-15° to 50°C) |
| Relative Humidity | 0% to 90% RH, Non-Condensing |
COMMUNICATIONS
| Network Compatibility | 1 Gbps (Gigabit) |
| IEEE Standards Supported | 802.3; 802.3ab; 802.3af; 802.3u |
CONNECTIONS
| Side A - Connector 1 | RJ45 (FEMALE) |
| Side B - Connector 1 | RJ45 (MALE) |
| Side B - Connector 2 | MICRO-USB B (MALE) |
STANDARDS & COMPLIANCE
| Product Compliance | RoHS; CE (Europe); REACH; FCC (USA) |
WARRANTY & SUPPORT
| Product Warranty Period (Worldwide) | 3-year limited warranty |
0 Reviews Hide Reviews Show Reviews
Eaton
Eaton NPOE-EXT-1G30WP - WTRPRF POE EXTENDER/REPEATER
$277.00
Gigabit Extender Lets You Cascade Your Existing PoE/PoE+ Connection up to 500 MetersThis single-port connector allows you to extend the connection between your powered source...
Eaton
Eaton NPOE-EXT-1G30 - POE EXTNDR/REPEATR,30W AF/AT
$170.00
Gigabit Extender Lets You Cascade Your Existing PoE/PoE+ Connection up to 500 Meters This single-port connector allows you to extend the connection between your powered source...
Eaton
Eaton NPOE-30W-1G - GIGABIT ACTVE POE INJECTOR 30W
$80.00
Eaton NPOE-30W-1G - GIGABIT ACTVE POE INJECTOR 30WTrionics Distributor of Tripp Lite By Eaton,MPN: NPOE-30W-1G Tech SpecsSpecificationsManufacturer Part NumberNPOE-30W-1
Eaton
Eaton NPOE-EXT-2X1G30 - 2-PT GB WTRPRF POE EXTNDR,100M
$272.00
Gigabit Extender Lets You Cascade Your Existing PoE/PoE+ Connection up to 400 MetersThis dual-port extender/repeater allows you to extend the connection between your powered...
Eaton
Eaton NPOE-30W-1G-INT - GB POE INJCTR, 30W, INT PSU
$87.00
Adds a PoE Device to Your LAN Without Adding a PoE SwitchNow you can add a surveillance camera, wireless access point, VoIP phone or other PoE (Power over Ethernet) device to...